This 2019 Land Rover Discovery Sport TD4 HSE has been back to the workshop. Since we recently serviced it we found that the external water pump was leaking excessive coolant and that the customer had been regularly topping up the coolant.
We access and replace the water pump with a brand new genuine part and talk specifically about what to remove and successfully carry out this repair. We also talk about the functions of the water pump and what other electrical items are used to regulate vehicle engine temperature.
This turned out to be a straight forward repair and it something that I would encourage anyone to do themselves.
Thanks in advance and don’t forget to like & subscribe.
source
Do you know if the pump can be changed without having to put it on a lift or take off the tire??
Can you do one for gasoline engine? 2017 discovery sport!
Thank you and really good video. I have 2016 Evoque, same electric water pump. I have changed the water pump and thermostat but the car runs on low coolant temperature would only hit 90c if left idling for an hour, drops rapidly when driving. Any views would be appreciated.
very good instructions thank you
Can you maybe tell me what that noise is? Is it maybe the water pump? https://youtube.com/shorts/_qmliNSpDRM
Great video, very helpful and well presented. Thanks!
Buen video amigo
Hearing a British guy do a video on repairing a British car just makes it fn authentic 😂. (Even though the car isnt as British as it used to be 🙄)
Awesome videos btw. Thanks
I recently had a water pump replaced and now the car won’t get up to temperature. Is it possible if the variable water pump is always full open that the engine never gets hot? 🤔
This has got to be one of the best videos I have seen, thanks very much
I'm working on mine tomorrow with the same issue.
Perfect good job and very well explained. Thumbs up
Outstanding video! Very helpful. Thanks!
Thank you my friend very very helpful video
Thank you my friend very very helpful video
Would you happen to know how many miles the discovery was at? I believe I have the same problem but using dye to confirm it is the water pump. Thanks.
Very informative and well made video. Thanks for sharing 👌
Good camera work. Very professional
Topix has the pulley bolts torque at 25nm and the pump bolts at 12nm. 👍
The 3 wires connector is the coolant pump position sensor connector and the 2 wire connector is for the coolant pump variable soleniod connector